 |
 | | (4)
- Interchangeable Blade Terminals: Accepts ATC blade-type fuses, or blade-type, auto or manual reset circuit breakers.
- Wiring: Output terminals - .250" x .032" OC rated 30A max. per circuit; Input terminals - No 10-32 stud input rated 150A max.Material: Black, Ul, rated 94VO thremoplastic, -20 degree F to 150 degree F. Application: Compact and lightweight, yet rugged enough for use in trucks, buses, boats, RV's etc.
- Other Features: No top cover needed, recessed trifurcated fuse contacts. Recessed mounting holes.
|
|
|
|
|
 | | (2)
- Interchangeable Blade Terminals: Accepts ATC blade-type fuses, or blade-type, auto or manual reset circuit breakers.
- Wiring: Output terminals - .250" x .032" OC rated 30A max. per circuit; Input terminals - No 10-32 stud input rated 150A max.Material: Black, Ul, rated 94VO thremoplastic, -20 degree F to 150 degree F. Application: Compact and lightweight, yet rugged enough for use in trucks, buses, boats, RV's etc.
- Other Features: No top cover needed, recessed trifurcated fuse contacts. Recessed mounting holes.
|
|
|
|
|
| | | - Interchangeable Blade Terminals: Accepts ATC blade-type fuses, or blade-type, auto or manual reset circuit breakers.
- Wiring: Output terminals - .250" x .032" OC rated 30A max. per circuit; Input terminals - No 10-32 stud input rated 150A max.Material: Black, Ul, rated 94VO thremoplastic, -20 degree F to 150 degree F. Application: Compact and lightweight, yet rugged enough for use in trucks, buses, boats, RV's etc.
- Other Features: No top cover needed, recessed trifurcated fuse contacts. Recessed mounting holes.
|
|
|
|
|
 | | (2)
Heavy Duty 30 Amp. Fuse Holder, 12 gauge Wire
|
|
|
|
|
 | | Heavy Duty In-Line Fuse Holder for use with 25 or 30 Amp ATO fuses Supplied with two 4" leads of 12 gauge wire.
|
|
|
|
|
| | | Heavy Duty In-Line Fuse Holder for use with 3, 5, 7.5, 10, 15 and 20 Amp ATO fuses. Supplied with 8" loop of 16 gauge wire.
|
|
|
|
|
 | | |
|
|
|
|
 | | - New 7 Terminal Junction Box designed to offer a quick and trouble-free method for connecting wires between the trailer and the towing vehicle.
- Black ABS plastic cover and base complete with 5 open rubber grommets, 5 closed rubber grommets, 7 No 10-32 threaded studs, and mounting hardware.
- Dimensions in inches: L 8.06 inch x W 3.2 inch x H 2.09 inch
- Two mounting holes .38 inch dia., 7.38 inch on center.
|
|
|
|
|
| | | |
|
|
|
|
 | | |
|
|
|
|
 | | (4)
Rating: 30A, 600V; Operating Temperature: 250°F (120°C); Standards: 2 to 10 steel studs on .750" centers and a "dog point" to guide nut into 10-24 thread; Torque: Recommended 20 in/lb (25 in/lb max.)
|
|
|
|
|
| | | (5)
Rating: 20A, 300V, UL & CSA; Center Spacing: 7/16inch; Wiring: Terminals will accept maximum wire size of AWG No.12; Terminal Screw Size: No.6-32 philslot combination; Distance Between Barriers: 0.353"; Mounting: No.6 Screws; Temp. Rating: °F(°C); 302 (150) max. -40(-40)min.
|
|
|
|
|
 | | (2)
2 Wire connector assembly used on all vehicles with 2 prong seal beam lighting, or 2 prong flashers and
3 Wire connector assembly used on 3 prong seal beam lighting, or 3 prong flashers.
|
|
|
|
|
 | | Dual Relay with Fuses. For general application for passenger cars and trucks. Fuses may be replaced by removing cover on relay. Complete with hardware and instructions for installation. Recommended Usage - one for each headlight.
|
|
|
|
|
 | | 12 Volt Pilot Light. Red 1/2" diameter faceted lens. For panel mounting through 5/16" hole. Has snap-out socket for conventional bulb replacement.
|
|
|
|
|
 | | (2)
- Jumper terminals designed to provide remote mounting for battery connections either inside or outside of the vehicle.
- Easily installed, the positive terminal can be individually used or in conjunction with the negative terminal as a pair.
- Rubber caps, solid brass studs, brass hex nuts and brass lock washers.
- Dimension for grooved contact post: 13/16" (20.63mm) dia., 1 1/8" (28.77) long.
|
|
|
|
|
 | | (3)
Horn Buttons with clamp on bracket, chrome plated housing or with flat surface.
|
|
|
|
|
 | | Universal- Truck Low Air Pressure And Bus Rear Door Warning. 2 Screw Terminals. 76dB @ 4: REPLACES: Ford FDM 2938A; CMC Truck and Coach 76023; Wayne Works Div., Divco-Wayne E-11811A and other 12 volt applications.
|
