 |
 | | (11)
- Meets and exceeds all standards of SAE J560.
- Floating pins for ease of alignment
and maximum contact.
- Will accept the widest range of wire
gauges, from #16 wires to #8 ground
wire.
- Interchangeable with all competitive
ATA types.
- Tapered design fits comfortably and
conveniently for easy hand-position pull.
Jumbo finger pull grips and two hang-up
holes.
- High-impact cycolac interior with extended
lip for easy removal and replacement.
- Solid brass terminal screws.
- 40 amps continuous duty @ 6-28 VDC.
- WeatherBeater seal accomodates .450
minimum wire dia.
|
|
|
|
|
 | | (20)
- Meets and exceeds all standards of SAEJ560 (Solid Pin Sockets only)
- Floating pins for ease of alignment and Maximum Contact
- Self grounded. (Die Cast only)
- Optimum slant mount and drain slot rid housing interior of accumulated moisture.
- Will accept the widest range of gauges from #16 wires to #8 ground wire. Ground Terminal Pin #1 will accept #14 gauge min. to #8 gauge max. Other terminals will accept #16 gauge min to #10 gauge max.
- 40 amps continuous duty @ 6-28 VDC.
- Self grounded (Die Cast only) to #1 Ground Terminal
- Stainless steel spring
- Recommended Moutning Hole = 2" Dia.
- Interchangeable with all competitive makes.
|
|
|
|
|
 | | (9)
Base plate and back plate made from rugged glass filled nylon to resist breaking. Bottom lip has been extended to allow for better plug and cable support. Drain hole has been incorporated into the housing to allow accumulated moisture to escape. Will accept hte widest range of wire gauges from #14 wire to #8 ground wire. Will accept all plugs conforming to S.A.E. J560 specifications. Ground may be tied to any screw mounting the rear terminal plate. Designed to provide easy serviceability of circuit breakers. Recommended that positive feed be attached to aux post on circuit breaker.
|
|
|
|
|
 | | (18)
- Three socket versions to choose from: Exposed, Rubber boot coverage, or Die-cast shell coverage.
- High impact interiors of super strength keyed for proper assembly.
- Brass terminal pins for best conductivity, terminals accept up to #12 gauge wires.
- Plug available with or without cable guard.
- Replaceable plug interior helps keep down maintenance costs.
- Plated steel cable guard prevents cable chafing.
- Two 1/4" mounting holes on 6-way sockets, 2-7/8" on center. Mounts through 1-3/8" hole.
|
|
|
|
|
 | | (3)
Polarized, chrome plated housing, spring loaded cover. Durable interiors. Split brass contact for maximum current. Mounting holes 1-3/4" on centers.
|
|
|
|
|
 | | (4)
Latest design die cast 4-pole unit incorporating many new and improved features.
- Extended exterior and socket conceals terminals.
- Unique cable clamp prevents chafing - gives more cable support - saves installation time.
- Integral finp-pr erins for nositivp null - never shakes loose.
- Stainless steel spring.
- Dust and water resistant.
- Polarized.
- Heavy duty 6-way & 4-way terminals accept up to #12 gauge wire.
- Two 1/4" mounting holes on 4-way sockets, 2-7/8" on center. Mounts through 1-3/8" dia. hole.
|
|
|
|
|
 | | (3)
12-24 Volts, 20 Amp, Polarized. Chrome Die Cast ABS Plastic High impact green insulators and split brass contacts.
|
|
|
|
|
 | | (8)
This rugged Single-pole Connector has a continuous duty capacity of 300 amps, and is ideal for almost all heavy-duty power applications- on trucks, agricultural equipment, utility vehicles, winches, light air craft ground equipment, etc. The connector is interchangeable with competitive brands.
Provides power for auxiliary equipment from battery.
|
|
|
|
|
 | | (8)
Molded Inline connectors are an economical means of connecting electrical systems. Wires are color coded for easy installation. Standard 18 gauge automotive wire, 12" long, except where noted. Polarized to insure proper connection. Molded case offers all-round weather protection. 12 Volts, 15 Amps.
|
|
|
|
|
 | | (27)
RV Connectors Heavy Duty include:
- 7-Way Connectors and Sets
- 9-Way Connectors and Sets
- Connector Adaptors
|
|
|
|
|
 | | (5)
- Socket, bracket, interlocking connector and harness assembly, and wire leads color coaded to RVI standards.
- Interlocking connector that seals out moisture, eliminates loose wiring, and forms weather-tight, non-corrosive assembly.
- Includes mounting hardware and installation instructions.
- 7-Way Connectors and Sets
|
|
|
|
|
 | |
- Convenient snap-fit socket and bracket assembly that eliminates the need for an adapter.
- Plugs directly into the existing OEM vehicle harness system for new installations or when purchased as a kit # 11-927 (which p includes the 4 ft # 11-998 harness), provides replacement of damaged Aftermarket or OEM sockets and wiring harnesses.
- The socket features a high impact shell, stainless steel spring, and rubber gasket to provide a weather resistant design.
- The bracket is black e-coated steel.
- Mounting hardware and installation sheet included.
|
